Filter
Top Products
Dimensions [Unit : mm (inch)]
Specifications
Model
Temperature range
Maximum cooling performance
Exterior dimensions (W x D x H)
Interior dimensions (W x D x H)
Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system
Compressor
Refrigerant
Evaporator
Alarm system
MDF-C8V1
-60 to -80°C (1°C increments)
-80°C (Ambient temp. 30°C)
550 x 685 x 945 mm (21.6” x 27.0” x 37.2”)
405 x 490 x 425 mm (15.9” x 19.3” x 16.7”)
84 Liter (3.0 cu.ft.)
Approx. 67 kg (148 lbs.)
2” box: 42pcs. (IR-207C x 6 racks)
Outer Lid: 1piece, Inner Lid: 1piece (PS + PE foam)
New VIP + Rigid polyurethane foam (HC)
New mixed refrigerant cooling system
Rotary type, Output: 400W
HFC
Tube on sheet type
• High/Low temp. alarm (±5°C to ±20°C) • Power failure alarm
• Remote alarm contact: DC30V, 2A
Options
Pull-down characteristics Pull-up characteristics during power failure CO2 backup system operation characteristics
Performance Data
40
20
0
–20
–120
–40
–60
–80
–100
076528341
Temperature (˚C)
Time (hour)
20
0
–20
–40
–60
–80
–100
067532184
Temperature (˚C)
Time (hour)
Central air temp. in cabinet
Ambient temp. 30˚C, No-load
525201510 30 35
20
10
15
5
Time (hour)
Ambient temperature (˚C)
Ambient temp. and maintenance
of –70˚C by injection of LCO
2 (30kg)
More advanced insulation system:
V.I.P. PLUS
™
SANYO’s more advanced insulation system
V.I.P. PLUS
™
enables reducing the thick-
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V1 takes full
advantage of this feature.
Use of V.I.P. PLUS
™
insulation material on
the front, left, and right sides enables a
smaller installation space with the highest-
class storage capacity ratio.
New cooling circuit enables
filterless structure
A new cooling circuit makes the
inconvenient customer maintenance
procedure of filter cleaning unnecessary.
Newly developed single-compres-
sor system
Use of a newly developed single-compres-
sor system achieves an approximately
40% reduction in power consumption and
enables low-noise operation.
MDF-C8V1
Conventional
model*
Rated power consumption
340W/330W
550W/600W
Circular
recorder
MTR-G85
Strip chart
recorder
MTR-85H
CVK-UB4
LCO2 Back-up
system
Temperature
recorders
Back-up system
mounting kit
MDF-UBK
Sensor cover
MTR-C8
Recorder
mounting kit
MDF-S3085
(for MTR-85H)
Inventory rack
IR-207C
MDF-C8V1Conventional model*
C
a
p
a
c
it
y
8
4
L
C
a
p
a
c
it
y
8
6
L
0.377m
2
0.525m
2
Installation
space
*SANYO comparison
*SANYO comparison (115V, 60Hz/230V, 50Hz)
550 (21.6”)
35 (1.4”)
852 (33.5”)
430 (16.9”)
887 (34.9”)
945 (37.2”)
58 (2.3”)
44 (1.7”)
685 (27.0”)
39 (1.5”)
729 (28.7”)
405 (15.9”)
490 (19.3”)
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
In order to use the freezer at a stable temperature for a long time, it is recommended that the temperature be set to at least 5°C higher
than the indicated lowest temperature. In addition, depending on the usage conditions, it may not be possible to reach the indicated
lowest temperature.
MDF-C8V1
Distributed by:
©2008 SANYO Printed in Japan 2008.12 MA
SHR135
Features
SANYO Electric Co., Ltd.
Biomedical Division
http://www.sanyo.co.jp/cmg/biomedical
SANYO Electric Co., Ltd., Biomedical Division, Gunma is certified for:
Quality management system: ISO9001 / Medical devices quality management system: ISO13485 / Environmental management system: ISO14001
RoHS (European Restriction of Hazardous Substances directives) compliant
Caution:
SANYO guarantees the product under certain warranty conditions.
SANYO in no way shall be responsible for any loss of content or damage to content.
• Appearance and specifications are subject to change without notice.