Sanyo MPR-414FS Refrigerator User Manual


 
47
15
OPERATING INSTRUCTIONS
Alarm temperature setting
The high temperature and low temperature at which the alarm will be activated are effective for freezer
and refrigerator. The following shows the outline of the alarm temperature setting.
Display Mode Application Settable range
F01 High temp. alarm setting +2 to +14
o
C
F02 Low temp. alarm setting
Refrigerator
-2 to -14
o
C
F03 High temp. alarm setting +5 to +15
o
C
F04 Low temp. alarm setting
Freezer
-5 to -15
o
C
Table 3 shows the basic operation for high temperature alarm setting and table 4 shows low temperature
alarm setting for refrigerator. Perform key operation in the sequence indicated in the table. The
example in the table is based on the assumption that the high temperature alarm is activated when the
chamber temperature deviates from set temperature by more than +3
o
C and low temperature alarm is
activated when the chamber temperature deviates from set temperature by more than -3
o
C.
Note: The temperature alarm setting at the factory is as follows:
High temp. alarm Low temp. alarm
Refrigerator Set temp. +5
o
C Set temp. -5
o
C
Freezer Set temp. +10
o
C Set temp. -10
o
C
Table 3
Operation Key operated Indication after operation
1
-----
The current refrigerator temperature
is displayed.
2
Press and hold the numerical value
shift key for about 5 seconds.
The first digit of the temperature
display blinks.
3
Set the first digit to 1 with the
numerical value shift key. (Note 1)
The first digit of the temperature
display blinks.
4 Press the set key. SET
The current set value is displayed
and the first digit of the temperature
display flashes.
Pressing the key leads the change of flashed
digit.
5
Set to 003 by using digit shift key
and numerical value shift key.
Pressing the key shifts up the figure
of the current digit.
6 Press the set key. SET
The value is stored in memory and
the current refrigerator temperature
is displayed.
Note 1: For the freezer, set the first digit to 3 (F03).