Filter
Top Products
14
3.10 Installing handrail and bumper
Attaching the Bumper
1. Attach Maintenance Bumper (length 39-3/8 inches) to bumper brackets over the electrical connection box
(“raceway”) on each merchandiser. The raceway is located on the right end of each merchandiser.
2. Attach Full-Length Bumpers between Maintenance Bumpers on separate merchandisers, and also between
Maintenance Bumpers and patch ends.
* Cut Full-Length Bumpers to size on-site. Cut to correct size so that no gaps remain between pieces.
Attaching the Handrail
1. Starting at one end of merchandiser line-up, attach pieces of Handrail to handrail retainer, butting the pieces
end-to-end without gaps.
2. When you reach the final piece of Handrail to be installed between the last merchandiser in the line-up and
the patch end, cut that piece to length so there are no gaps between handrails or between handrails and
patch ends.
Handrail
Handrail