Filter
Top Products
11
3.7.3 Connecting cases (End cases)
① Apply gasket as shown at right.
② Partially set M8 bolts in place at the four positions
shown at right, insert through connecting holes in the sides
of 8-ft or 12-ft wide island cases, then set firmly in place
from the 8-ft/ 12-ft unit side.
③ Fix the end case in position with the M8 bolts.
④ Fix the hand rail joints in place.
⑤ Fix the bumper joints in place.
Note: Gasket ends that are open must be
sealed off by applying silicone at the
installation site.
Gasket