Filter
Top Products
Cube Size Adjustment
The size of the ice cubes is determined by how
long the ice machine is in the freezing cycle. That
is controlled by the cube size thermostat.
The cube size thermostat's sensing portion is
attached to the suction tube, near the outlet of the
evaporator. As the machine makes ice, the
temperature of the suction tubing falls. When it
reaches a preset point, the thermostat's contacts
close and connect power to the electronic timer.
The electronic timer finishes the freeze cycle.
Adjustment
There is only one proper ice cube size, see the
diagram to the right. If the cubes are not the correct
size, adjust the cube size thermostat.
Rotate the cube size thermostat's adjustment
screw clockwise to increase the size of the cube.
Rotate the cube size thermostat's adjustment
screw counter clockwise to make the ice cube size
smaller.
September 2009
Page 13
SCCG30 & SCCP30
Service Manual
Too Small, Adjust Cycle Longer
Side Views of Cubes
Just Right
Too Large, Adjust Cycle Shorter