Filter
Top Products
TO SET SELF=CLEAN CYCLE:
1, Close oven door. The door locks automatically after
the control is set.
2. Push CLEAN, Thetlme display will show (.... ). See
Fig. t.
Fig_1
@
3_ Press the UP or DOWN arrow pad to set the desired
length of clean time. Clean time is normally 3 hours.
You can change it between 2 and 4 hours, depending
on how dirty the oven is. See Fig. 2.
INCREASE OR DECREASEq
Fig°2
YOU can push STOP TItME to find out when the cycle
will end. Push CLEAN to return to countdown,
CLEAN TIME
WHEN A CLEAN CYCLE JS
FliNNSHED:
1. Wait until the LOCK display goes out. The oven
temperature must drop to a safe level before the door
can be opened. See Fig, 3.
(_)WAIT UNTIL LOCK GOES OUT
TO BNTERRUPT A CLEAN ©YCLE:
1. Push CLEAR.
Follow instructions under '%rtVHENA CLEAN
CYCLE IIS FSNBSHE_'.
TO SET DELAYED SELFoCLEAN
CYCLE:
Follow steps 1-3 under "TO SET SELF-CLEAN
CYCLE", THEN:
4, Press STOP TIME,
5. Set the time of day when you want the clean cycle to
end. See Fig. 4.
The control will calculate the start clean time.
Fig. 4
INCREASE OR DECREASE
CLEAN TiME
SET TIME OF DAY YOU
WANT CLEAN CYCLE TO END
Note:When selecting a stop time for a
dellayed clean cycle, you must allow
time foe' the 2-4 hour clean time,
"Door" will flash in display if you forget to close the
door.
NOTE:Your oven _ight shougd be OFF during a
self.cllean cyclle to prolong the life of the
bu]ib.
Fig., 3
14 NCSCL06