Filter
Top Products
side-by-side refrigerator | 46-51032/3/4/6/9
page 2 of 2
Effective 04/26/10
05610
Because of our continuous program of product improvement, Sears
reserves the right to change materials and specications without
notice. Consult installation instructions packed with the product for
nal dimensional data. For complete warranty information, contact
your local Sears Commercial Account Manager.
46-5103X.PDF
Measure Twice ...Order Once
Step-by-Step Instructions to Assure You Order the Proper Size Refrigerator
Measure Height
including flooring.
Be sure to allow
for hinge clearance
height if needed.
Measure Width
including countertop
overhang.
Measure Depth
including
molding or trim.
It’s Just Good Measure To Double Check Before You Order!
1. Measure the opening for the refrigerator. Don’t forget baseboards, molding,
tile, countertop overhang, etc. If there is an island in your kitchen, be sure
there is enough room to open the door.
2. Refer to the chart for the exact dimensions of the refrigerator.
3. IMPORTANT! Calculate the minimum opening required. When installing next
to cabinets, you must allow for Door Edge Clearance. (Multiply Door Edge
Clearance by 2 for counter-depth models.) When installing next to a wall,
you must allow for the Handle Clearance.
Adjacent Cabinet: ____ “F” + ____ Door Edge = ____ Min. Opening
Adjacent Wall: ____ “F” + ____ Handle = ____ Min. Opening
4. Calculate how much the refrigerator will protrude from cabinetry. If the
result is undesired, consider a counter-depth model.
____ “C” – ____24" Cabinet Depth + ______appro_x_. 2"____ Electric
& Water Connection Clearances = _____ which will Protrude Past
Cabinets
5. Measure each door and entry way in the home leading to the kitchen to
ensure the refrigerator can be moved through.