Filter
Top Products
Transferring the center hinge bracket
Cenler Right
(a) Remove the hinge bracket (and shim gbed to it) from
the center right side of the cabinet by removing the three
outermost Torx screws
(b) Remove the three outermost Torx screws from the
center left side of the cabinet and screw them into the
holes at the right side uncovered in Step (a) above_.
Do not remove
thisscrew
CenJerLeft
(c) Place the center hinge bracket over the holes at the
center left side of the cabinet, insert the screws you
removed from the opposite side, and tighten them.
Transferring the top hinge
Interchange hinge and screws at top right with
screws at top left of the cabinet. Do not tighten
the screws on the hinge side at this time
Transferring door handles
Freezer door
Handle I_
(a) Remove screw holding handle to top of door,
(b) Remove three screws holding handle to bottom of
door.
(c) Transfer screw from handle hole in top right of door
to opposite side_
(d) Transfer plug button in top left of door to opposite
side
(e) In reverse order, reassemble handle to right side of
door using screws removed in Steps (a) and (b).
Fresh food door
LongHandle
ShortHandle
(a) Transfer two screws in bottom left of door to
opposite side, (Wait until handle is moved before
reinstalling Frontscrew.)
_continued next page)
f7