Sears 61968 Refrigerator User Manual


 
/
Reversing Door Swing (continued)
Plug.buiton
l !
e
, '_'_'=_ Plugbu|ton
_''Handle plug
(b) Remove two screws holding handle to top of door,
(c) Remove handle plug, using putty knife, and
remove screw underneath_
(d) Remove handle_
(e) Transfer two screws from handle holes in top
right of door to opposite side,
(f) Transfer plug button in top left of door to
opposite side
(g) Transfer plug button on right front of door to
handle hole vacated by removal of screw under
handle plug,
(h) Reassemble handle to right side of door° Use
front screw removed in Step (a) to attach handle to
bottom of door,
Transferring doorstops
Left side
Rightside
(a) Remove metat doorstop on bottom right of
each door
(b) Replace door stops on left side after handles
have been moved_
Rehanging the fresh food door
(a) Lower the bottom
socket of the fresh food
door onto the pin on the
bottom hinge_ Be sure
the washer is in place on
the pin
(b) Tilt the door towards
the cabinet and gently
push the door under the
center hinge bracket and
align with the hole in the
center hinge bracket,
(c) Reinstall the hinge
pin with a 3/8" socket
and ratchet so it extends
through the hole in the
center hinge bracket and
into the socket on top of
the fresh food door,,
PlasticWasher
Center
ling_
Rehanging the freezer door
Center
hinge
PlasticWasher
(a) Lower the bottom socket of the freezer door onto the
center hinge pin, Be sure the washer is in place,
(b) Tilt the door towards the cabinet, lifting the top hinge
so the pin fits into the socket on top of the door,
(c) Tighten the top hinge screws after supporting the door
on the handle side and aligning so the gap between the
doors is even all across the front,
(d) Replace the hinge cover,
18