Filter
Top Products
Oven Control, Clock and Timer (continued)
Automatic Clock
The clock must be set for the automatic oven timing
functions to work properly, The time of day cannot be
changed during a Timed Baking or Self-Cleaning cycle.
To Set the Clock:
_)1. Press the CLOCK pad.
(A_(_2. Press the HOUR and MIN" Pads
to set the time of day.
HOUR Mill.
@@
Timer
The timer is a minute timer only.
The timer does not control oven operations, The
maximum setting on the timer is 11 hours and
59 minutes.
To Set the Timer:
1. Press the TIMER ON!OFF pad,
2. Press the HOUR and MIN. pads until the
amount of time you want shows in the
display, The timer will start automatically
within a few seconds of releasing the pad.
To Reset the Timer:
If the display is still showing the time remaining, you
may change it by pressing the HOUR and MIN. pads
until the time you want appears in the display.
If the remaining time is not in the display, recall the
remaining time by pressing the TIMER ON/OFF pad
and then pressing the HOUR and MIN_ pads until the
new time you want shows on the display.
To Cancel the Timer:.
To cancel the timer, the remaining time must be in the
display. To recall the time remaining, press the TIMER
ONIOFF pad once, To cancel the timer press the
TIMER ON/OFF pad again°
End of Cycle Tones
(on some models)
The end of cycle tone can be cleared by pressing the
TIMER ON/OFF pad or; on some models, by pressing
the COOK TIME ON/OFF pad depending on which
function you are using°
Power Outage
On some models, after a power outage the oven
will automatically resume its setting once the power
is restored°
For models with a CLOCK pad, when the power is
restored the display will flash the time of day until a
pad is pressed or the knob is turned. Reset the clock to
the correct time of day,
If the oven was in operation when the power outage
occurred, the OVEN SET knob must be turned back
to OFE Then reset the knob to the way it was before
the power outage.
If your model has a COOK TIME ON/OFF pad
and your oven was set for timed baking or roasting
when the power outage occurred, the clock and all
programmed functions must be reset. To reset them,
first turn the OVEN SET knob back to OFF, reset the
dock, functions and knob back to the way they were
before the power outage°
OVEN SET Knob
The OVEN SET
knob maintains the ow 0,
O
temperature you set from
WARM [170°E (77°C.)] SELFCLF._IIq
tOBROIL [550°E
o
(288°C.)]. It also has an P,_u,wo
OFF and a CLEAN setting,
OVENSET
¢,i
(appearance may vary)
The PREHEATED light glows when the oven reaches
your selected temperature.
The OVEN ON light will glow any time the OVEN
SET knob is not in the OFF position and is set on a
temperature or a function.
12