15
OPERATING INSTRUCTIONS
CHANGING THE INTERIOR LIGHT
INTERIOR LIGHT IN THE REFRIGERATOR .
Before changing the interior light, unplug the
refrigerator
from the power supply. If you
have difficulty changing the light, contact your service center.
WARNING
Place a flat screwdriver under
the light cover hooks and push in
the direction of the arrow.
Change the bulb with a new
one (
➁
)
Twin Deodorizer
•
Remove the cover with a flat blade screw driver as shown.
•
Take out the cartridge from the cover and soak it in clean and warm water for at least
4 hrs. Completely dry out the cartridge in sunlight for at least 8 hrs in an open area.
•
Repeat this process once or twice a year.
CLEANING THE ACCESSORIES
Replacement bulbs for both freezer and fridge are available from your local home improvement or
electronics store. Use replacement bulb size E26, maximum 40 watts.
NOTE
Replacement bulbs for both freezer and fridge are available from your local home improvement or
electronics store. Use replacement bulb size E17, maximum 30 watts.
NOTE
Upper
Lower (
RS265 / RS267B
**
/ RS267/ RS269L
**
)
After changing the bulb,
replace the light cover.
Place a flat screwdriver under
the light cover hooks and push
in the direction of the arrow.
Pull the cover in the direc-
tion of the arrow.
After changing the bulb,
replace the light cover.
E26
40W
E17
30W
•
If cartridge is dried in a confined area, there may be some odor.
•
Keep children away from contaminated water.
NOTE