Sears RS265L** Refrigerator User Manual


 
25
INSTALLATION INSTRUCTIONS
ADJUSTING THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of the freezer is lower than that of the
refrigerator.
If the door of freezer is higher than that of the
refrigerator.
3) After adjusting the doors, turn the nut clockwise ( ) until it reaches the lower end of the bolt, then
tighten the bolt again with the wrench () to fix the nut().
If you do not fix the nut (
)firmly, the bolt (
) may be released.
2) Please adjust the height difference between the doors by turning the bolt () clockwise ( ) or
counter
clockwise
().
When you turn clockwise ( ), the door goes up.
WRENCH
Adjustment part
NUT
BOLT
Adjustment part
WRENCH
NUT
BOLT
NUT
BOLT
WRENCH
WRENCH
WRENCH
BOLT
BOLT
Please open the doors and adjust them as follows:
1) Release the nut () on the lower hinge until it reaches the upper end of the bolt ().
BOLT
WRENCH
NUT
NUT
NOTE
NOTE
Adjust Leveling first.
NOTE
NOTE
When you release the nut (), use enclosed hex wrench () to turn the bolt() in a slightly
counter
clockwise
direction. This will enable you to loosen the nut() with your fingers.
NUT
    