Sears SGM466 Cooktop User Manual


 
5
WARNING
Assemble the burners and grates only when the cooktop
is cool.
Put the burner ring on the burner head of each 1.
burner as shown in Figure 1. Be sure to match
the correct sizes. As you put each ring in place,
line up the five tabs on the bottom of the ring
with the five notches in the top of each burner
head (see figure 2). Twist each ring back and
forth slightly to make sure it is properly seated.
Put the burner cap for each burner over the top 2.
of each burner ring (see Figure 1). Be sure to
match the correct sizes. The ridge around the
bottom edge of the cap goes around the top of
the burner ring.
Gently set the grates on top of the spill tray. Put 3.
the legs of each grate into the corresponding
dimples as shown in Figure 1.
Setting Up Your Cooktop
Figure 2 - Burner Ring Notches
Figure 3 - Properly Assembled Burner
Grate
Burner Cap
Burner Ring
Top Frame
Burner Head (Fixed)
SGM Burner Components
Figure 1 - Burner and Grate Assembly
Burner and Grate Assembly