Sharp EKJ-17WH Hot Beverage Maker User Manual


 
Page 3 of 5
PRODUCT DESCRIPTION
B
EFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you should
clean your kettle before use by boiling a full kettle of water twice and then
discarding the water. Wipe the surface with a damp cloth.
NOTE: the max capacity of kettle is 1.7L.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the power base and open the lid by
pressing the open lid button backwards and lifting it. Fill with the desired
amount of water and then close the lid. Alternatively, the kettle may be
filled through the spout. The water level should not exceed the MAX mark
or sit below the MIN mark. Too little water will result in the kettle switching
off before the water has boiled.
NOTE:
i. Do not fill the water over the maximum level, as water may spill out of the
Push button
Body
Spout
Handle
Switch
Body cover
Power base
Lid