Sharp KB6002LS Microwave Oven User Manual


 
17
OTHER FEATURES
SETUP/CUSTOM HELP
If the electrical power supply to your Microwave Drawer
should be interrupted, the display will intermittently show
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
after the power is reinstated. If
this occurs, the Setup/Custom Help option you input will
be erased. Simply touch Stop/Clear pad and reset.
AUDIBLE SIGNAL ELIMINATION
At the end of timed cook, beeps will sound. If you wish to
have the appliance with no audible signals, you can turn the
audible signals off.
TO TURN SOUND OFF
1 Touch Setup/Custom Help pad.
TOUCH
AGAIN
2 Touch Setup/Custom Help pad again.
SOUND
OFF ?
TOUCH
START
3 Touch START/Minute Plus pad. The display shows
SOUND
OFF
TO RESTORE SOUND
1 Touch Setup/Custom Help pad.
TOUCH
AGAIN
2 Touch Setup/Custom Help pad again.
SOUND
ON ?
TOUCH
START
3 Touch START/Minute Plus pad. The display shows
SOUND
ON
END OF COOKING REMINDER
At end of timed cooking, the microwave will signal every
10 seconds for the rst minute; then every 3 minutes until
Stop/Clear pad is touched, up to one hour.
TO TURN REMINDER OFF
1 Touch Setup/Custom Help pad three times. The display
shows
REMIND
SIGNAL
OFF ?
TOUCH
START
.
2 Touch START/Minute Plus pad. The display shows
REMIND
SIGNAL
OFF
.
TO TURN REMINDER SIGNAL BACK ON
1 Touch Setup/Custom Help pad three times. The display
shows
REMIND
SIGNAL
ON ?
TOUCH
START
.
2 Touch START/Minute Plus pad. The display shows
REMIND
SIGNAL
ON
.
AUTO START
If you wish to program the Microwave Drawer to begin
cooking automatically at a designated time of day, follow
this procedure.
1 Touch Setup/Custom Help pad 4 times. The display shows
AUTO
START
TOUCH
START
2 Touch START/Minute Plus pad.
ENTER
START
TIME
3 Enter start time.
4:30
TOUCH
CLOCK
4 Touch Timer/Clock pad.
ENTER
COOKING
TIME
5 Touch the number pads to enter cooking time.
20.00
TOUCH
START
OR
TOUCH
POWER
LEVEL
Touch Power Level pad repeatedly until the desired power
level is reached.
TOUCH
START
6 Touch START/Minute Plus pad.
DEMONSTRATION MODE
TO SELECT DEMO MODE
1 Touch Setup/Custom Help pad ve times. The display
shows
DEMO ON?
HOLD
START
3 SEC
.
2 Hold START/Minute Plus pad for 3 seconds. The display
shows
DEMO ON
.
TO CANCEL DEMO MODE
1 Hold Setup/Custom Help pad ve times. The display
shows
DEMO
OFF ?
TOUCH
START
.
2 Touch START/Minute Plus pad. The display shows
DEMO
OFF
Note:
Microwave Drawer doesn’t heat in Demo Mode.
Display counts down quickly.