Sharp R-1870 Convection Oven User Manual


 
10
BEFORE OPERATING
Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
Before the oven can be used, follow these
procedures:
1.Plug in the oven. Close the door. The oven display
will show
SHARP SIMPLY THE BEST PRESS
CLEAR AND PRESS CLOCK
.
2.Touch the STOP/CLEAR pad.
will appear.
3.Touch CLOCK and follow directions to set.
:
TO SET THE CLOCK
Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
PROCEDURE DISPLAY
1
2
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, will appear in the display.
Touch the STOP/CLEAR pad and re-enter the time.
If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show
SHARP SIMPLY THE BEST
. PRESS CLEAR AND PRESS CLOCK
after the
power is reinstated. If this occurs during cooking,
the program will be erased. The time of day will also
be erased. Simply touch STOP/CLEAR pad and
reset the clock for the correct time of day.
NOTE:
Your oven can be programmed with the door
open except for START/TOUCH ON, MINUTE PLUS,
SENSOR REHEAT and POPCORN.
ERROR
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel kitchen timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
MANUAL MICROWAVE OPERATION
Touch CLOCK pad.
ENTER
TURNTABLE ON
TIME
TURNTABLE ON
Enter the correct time of
day by touching the numbers in sequence.
12:30000
TURNTABLE ON
CLOCK
For most cooking, the turntable should be on; however
the turntable can be turned off so that it does not rotate
when extra large dishes, such as the popular 13"x9"x2"
glass utility casserole, are used. The casserole should
be placed on the turntable so that it is level.
Suppose you want to cook lasagna in a 13"x9"x2"
casserole for 45 minutes on 40% power.
TURNTABLE ON/OFF
PROCEDURE DISPLAY
1
2
3
4
3
12:30000
TURNTABLE ON
Touch CLOCK pad.
CLOCK
NOTE:
The door can be opened for checking food and the
turntable will stay in the off position. After checking,
close door and touch START/TOUCH ON.
The turntable will stay off for one minute after door is
opened when time-of-day appears in the display. It is
possible to reprogram the oven during that minute
without touching the TURNTABLE ON/OFF pad. The
display always indicates whether the turntable is off
or on.
THE TURNTABLE SHOULD ALWAYS BE ON WHEN
USING THE SPECIAL FEATURES. On/Off function
can be used with manual cooking modes and Sensor
Reheat. Turntable off condition will automatically change
to on condition when you select auto cooking except
Sensor Reheat and CompuBake.
When cooking large quantities of food which cannot
be stirred, it is best to use a lower power level such
as 40 or 50%. You may speed cooking of large
amounts by programming 5 to 10 minutes on 100%
power (HIGH) followed by the desired time on lower
power. See page 23 for how to program multiple
sequences. You may wish to reverse a large casserole
once during cooking; simply open door, reposition
casserole, close door and touch START/TOUCH ON.
1230
Touch TURNTABLE ON/OFF pad and note
TURNTABLE OFF in the display.
ENTER
TURNTABLE ON OFF
Enter cooking time.
45.00000
TURNTABLE ON OFF
P-40000
TURNTABLE ON OFF
Enter power level.
POWER
LEVEL
4500
4
START
TOUCH ON
45.00000
TURNTABLE ON OFF COOK
Touch START/TOUCH ON pad.
TURNTABLE
ON / OFF