Filter
Top Products
2
9
3
2
1
4
56
10
8
7
OVEN AND ACCESSORIES
14
15
11
12
13
OVEN:
1. Oven lamp
2. Control panel
3. Door opening handle
4. Waveguide cover (DO NOT REMOVE)
5. Oven cavity
6. Coupling
7. Door latches
8. Door hinges
9. Door seals and sealing surfaces
10. Door
11. Power cord
12. Ventilation openings
13. Outer cabinet
ACCESSORIES:
Check to make sure the following
accessories are provided:
14. Turntable
15. Roller stay
• Place the roller stay in the coupling
on the oven floor, then place the
turntable on to the roller stay,
ensuring it is located firmly.
• To avoid turntable damage, ensure
dishes or containers are lifted clear
of the turntable rim when removing
them from the oven.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is
not damaged.
• Always operate the oven with the turntable and roller stay fitted correctly. This promotes thorough,
even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to
the oven.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you
start the oven. This does not affect cooking performance.
• When you order accessories, please quote both the PART NAME and MODEL NUMBER to your
dealer or SHARP approved service facility.
WARNING:
The door, outer cabinet, oven cavity, turntable and dishes will become very
hot during operation. To prevent burns, always use thick oven gloves.
R-27STM-A.indd 2R-27STM-A.indd 2 7/3/09 5:31:03 PM7/3/09 5:31:03 PM