Filter
Top Products
33
DOOR
Wipe the window on both sides with a damp cloth to remove any
spills or spatters. Metal parts will be easier to maintain if wiped
frequently with a damp cloth. Avoid the use of harsh abrasives.
EXTERIOR
The outside surface is painted. Clean the outside with mild soap
and water; rinse and dry with a soft cloth. Do not use any type
of household or abrasive cleaner.
INTERIOR
Cleaning is easy because no heat is generated to the interior
surfaces; therefore, there is no baking and setting of spills or
spattering. To clean the interior surfaces, wipe with a soft cloth
and warm water. DO NOT USE ABRASIVE OR HARSH
CLEANERS OR SCOURING PADS. For heavier soil, use baking
soda or a mild soap; rinse thoroughly with hot water. NEVER
SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF
THE OVEN.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the oven. To remove,
combine 1 cup water, grated peel and juice of 1 lemon and several
whole cloves in a 2 cup glass measuring cup. Boil for several
minutes using 100% power. Allow to set in oven until cool. Wipe
interior with a soft cloth.
CONTROL PANEL
Care should be taken in cleaning the control panel. If the control
panel becomes soiled, open the oven door before cleaning. Wipe
the panel with a cloth dampened slightly with water only. Dry
with a soft cloth. Do not scrub or use any sort of chemical
cleaners. Close door and touch STOP/CLEAR.
TOUCH SCREEN
Wipe the touch screen with a damp cloth and then dry with a soft
cloth. Do not allow soil to accumulate on the touch screen.
TURNTABLE/TURNTABLE SUPPORT
The turntable and turntable support can be removed for easy
cleaning. Wash them in mild, sudsy water; for stubborn stains
use a mild cleanser and scouring sponge as described above. They
are also dishwasher-proof. Use upper rack of dishwasher. The
turntable motor shaft is not sealed, so excess water or spills should
be wiped up immediately.
WAVEGUIDE COVER
Carefully wash any food particles from the waveguide cover
located on the right side in the oven cavity. Do not remove the
waveguide cover.
CLEANING AND CARE
Exterior
Interior
Turntable Support
Turntable