Sharp SJ-GC584R Refrigerator User Manual


 
8
STORING FOOD
IN
OUT
Refrigeration reduces the rate of food spoilage.
To maximise the shelf life of perishable food products,
ensure that the food is of the freshest possible quality.
The following is a general guide to help promote longer food
storage.
Fruit / Vegetables
To minimize moisture loss, fruit and vegetables should be
loosely enclosed in a plastic material (e.g. wrap, bags) and
place in the fruit and vegetable crisper.
Dairy Products & Eggs
Most dairy products have a use by date on the outer
packaging which informs the recommended temperature
and shelf life of the product.
Eggs should be stored in the Egg tray.
Meats / Fish / Poultry
Place on a plate or dish and cover with paper or plastic
wrap.
For larger cuts of meat, sh, or poultry, place to the rear of
the shelves.
Ensure all cooked food is wrapped securely or placed in an
airtight container.
NOTE
Evenly place the food on the
shelves to allow the cooling air
to circulate efciently.
Hot foods should be cooled
before storing. Storing hot foods
increases the temperature in the
unit and increases the risk of
food spoilage.
Do not block the outlet and
inlet of the cool air circulating
circuit with foods or containers;
otherwise the foods will not be
evenly cooled throughout the
refrigerator.
Keep the door securely closed.
Do not place food directly in front of cold air
outlet. This may lead to the food freezing.
For best freezing
Quality of foods should be fresh.
Freeze small quantities of food at a time to freeze them
quickly.
Food should be properly sealed, sealed tightly or covered.
Evenly place the food in the freezer.
Label bags or containers to keep an inventory of frozen
food.
To set sound “OFF”
Press the key and key simultaneously and
continuously for 3 seconds or more again.
Beep beep beep
To set sound “ON”
Press the key and key simultaneously and
continuously for 3 seconds or more.
Beep beep beep
Sound ON/OFF
At rst, the sound is set “ON”.
Use this feature when you want to switch the sound of key
operation to “ON” or “OFF”.
It shows the sound “OFF”.
The indication will
disappear.
(B344).indb 8 2012/05/28 9:46:47