Sharp SJP600M Refrigerator User Manual


 
3
Plasmacluster
HINTS WHEN MAKING ICE
1. The included Water supply cup can be used
to measure the amount of water to pour into
Ice cube trays. Pouring too much water into
the tray will result in the ice cubes connecting
to each other when frozen.
2. When the ice cubes are made, turn the lever
clockwise to empty the ice into Ice cube box.
NOTE:
To prevent damage to the Ice cube box, do not
make ice in the Ice cube box or pour oil into it.
Defrosting is fully automatic due to a unique energy saving system. Whereby the defrost cycle start time
is proportional to the running time of your refrigerator compressor, i. e., the less time the refrigerator
compressor operates (during the winter season or you’re away on holidays), the longer the time between
each defrost cycle.
DEFROSTING
DEODORIZING UNIT
A built-in unit which requires no manual operation because it automatically starts operating when the
refrigerator is powered on.
Amount for both Ice cube trays
Amount for one Ice cube tray
Ice cube box
Lever
The plasmacluster automatically starts operating when the refrigerator is powered on.
Notes about PLASMACLUSTER operation
The ionizer inside your refrigerator releases clusters of ions, which are collective masses
of positive and negative ions, into the freezer and refrigerator compartment.
These ion clusters reduce airborne mold fungus.
• There may be a slight odors in the refrigerator. This is the smell of ozone generated by
the ionizer. The amount of ozone is minimal, and quickly decomposes in the refrigera-
tor.
mold
fungus
PLASMACLUSTER(ON/OFF)
button
1.Press “PLASMACLUSTER(ON/OFF) button”, and the
PLASMACLUSTER lamp goes out and the plasmacluster turns
off.
2.Press “PLASMACLUSTER(ON/OFF) button” again, and the
PLASMACLUSTER lamp lights up. The plasmacluster turns on.
PLASMACLUSTER (Only for SJ-P600M, SJ-P560M, SJ-P520M)