Wine Preservation System – Operation Instruction
We recommend that you charge your Wine Preserver for at least 12 hours before
using for the first time. Please follow the instructions for recharging as stated below:
1) Charging your Wine Preserver
• PlugendoftheadaptorcordintotherechargingbaseandtheA/Cendintoan
electrical outlet.
• Placethemotorizedwinepreserverontothechargingbasemakingsurethatitis
rmlyinpositionandthatitisinfullcontactwiththerechargingconnection.(Fig.1)
• PressthepowerbuttononceandaredlightturnsONindicatingthattheunitis
charging.Itwilltakeapproximately8-10hourstorechargeyourWinePreserver.
• Whenthewinepreserverisfullycharged,theLEDlightbecomesgreen.(Fig.1)
2) Date Dial
• Pressandholdfor0.5secondonthescreenoftheLCDdatecountertostart
the countdown.
• TheLCDinitiallyshows“0”withasingleincrementevery24hours.
• Itwillautomaticallychangetothe1stdayafter24hoursandchangetothe2nd
dayafter48hoursandsoon,upuntilthe9thday.
• Pressandholdfor0.5secondonthescreenoftheLCDdatecountertoturnoff.
Note:A3Vbuttoncellbatterycomespre-installedintotheDateDial.We
recommended that you always keep the date dial off while not in use for
energy saving.
Battery Replacement
• Unscrewthefourscrewsfromitsendcaptoremoveitstopcoveras
shown attached.
• Takeoutthedatecountermodulebyreleasingthesnapsandreplace
the battery.
• UseasingleCR9273Vtypebatterypermoduleonly.
CHARGE
KP-W140_Wine Preserver wBase.ai 7/1/09 1:24:00 PM
5
4
Fig. 1
Wine Preserver
Charging Base
AC Adaptor
KP-W140_Stopper.ai 7/1/09 2:44:23 PM
Silicon Stopper (4)
LED Light
Date Dial
Power Button
Screws (4)