Filter
Top Products
- 4 -
Tips for safety:
• In cases of danger, immediately remove the power
plug from the wall socket.
• Use the appliance exclusively for the purposes
described in these operating instructions.
• Always be alert! Always pay attention to what
you are doing and act
wwiitthh ccoommmmoonn sseennssee
. Never
use the appliance when you are distracted or
don’t feel well.
• Ensure that the appliance is correctly and com-
pletely assembled before taking it into use. The
appliance can first be taken into use when the
clamps have been closed.
• After every use of the juice extractor ensure that
the On/Off switch is moved to the position "Off"
("0"). . The motor must come to a complete stop
before you begin to disassemble the appliance.
• Remove the power plug from the wall socket
when the appliance is taken out of use, when
removing components and before cleaning it.
• Do not use the appliance outdoors.
Assembling and operating the
appliance
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
o
,
- to the left, the container for fruit pulp and
vegetable mash
s
- to the right, the outlet pipe for the juice
y
.
Warning:
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice catchment bowl
t
on the app-
liance base
u
, so that the three tenons and the
juice outlet
y
are securely caught in the recesses.
2. Place the filter
d
on the drive shaft
f
and press
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
3. Place the housing lid
e
on the juice catchment
bowl
t
, so that the loading shaft is sitting above
the cutters of the filter
d
.
4. Ensure that the housing lid
e
is sitting firmly in
the recesses of the juice catchment bowl
t
. Lift
the clasps
r
and hook them into the notches on
the housing lid
e
.
5. Press the lower part of the claps
r
against the
appliance until they engage.
6. Slide the container for fruit pulp and vegetable
mash
s
from below under the ejection shaft.
7. Push the foam separator plate in the separate
juice collector
h
and then put the lid on. Place
the separate juice collector
h
next to the appli-
ance so that the juice outlet
y
projects into the
juice collector
h
.
8. Insert the power plug
i
into the wall socket.
IB_KH451_46613_LB6.qxd 14.01.2010 10:13 Uhr Seite 4