Silvercrest SZP25A1-07 Juicer User Manual


 
- 3 -
Using the appliance safely:
In the event of danger, immediately remove the
power plug from the wall socket.
Never use the appliance for purposes other than
those for which it was designed.
Remove the power plug from the wall socket
when the appliance is not in use, when you re-
move parts and before cleaning the appliance.
Do not use the appliance outdoors.
Appliance description
q
Lid
w
Large squeezing cone
e
Small squeezing cone
r
Upper fruit pulp sieve
t
Fruit pulp regulator
y
Lower fruit pulp sieve
u
Juice collector
i
Drive axle
o
Power cable with power plug
a
Appliance plinth
s
Power cable storage
Set-up and assembly of the
appliance
Important:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable
o
completely from the
cable storage
s
and secure it in the lateral
recess on the appliance plinth
a
.
2. Place the appliance plinth
a
on a level and
slipfree surface.
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector
u
on the drive axle
i
of the appliance plinth
a
and turn it clockwise
as far as it will go.
4. Place both parts of the fruit pulp sieve
r
/
y
into each other so that the fruit pulp regulator
t
protrudes through the recess. Both parts must
audibly engage.
5. Place the assembled fruit pulp sieve
r
/
y
on
the juice collector
u
. The fruit pulp regulator
t
must lie on the grip and catch in the rabbet on
the grip.
6. Press the small squeezing cone
e
on the drive
axle
i
so that it engages.
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone
w
over the small
squeezing cone
e
. Ensure that the lobes of the
small squeezing cone
e
engage in the recesses of
the large squeezing cone
w
.
7. Insert the power plug into a wall power socket.
The appliance is now ready for use.
IB_56611_SZP25A1_LB6 30.07.2010 11:17 Uhr Seite 3