Smeg A11CER Cooktop User Manual


 
Instructions for the user
34
3. DESCRIPTION OF CONTROLS
3.1 Front control panel
All the cooker controls and commands are on the front panel.
The user has only to press the central key for 1 - 2 seconds to enable
use of the oven on first use or after a power blackout.
DESCRIPTION OF SYMBOLS
OVEN THERMOSTAT
CENTRAL
COOKING ZONE
OVEN FUNCTIONS
REAR RIGHT-HAND
COOKING ZONE
FRONT LEFT-HAND
COOKING ZONE
FRONT RIGHT-HAND
COOKING ZONE
REAR LEFT-HAND
COOKING ZONE
THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning
the knob clockwise to the required temperature, between
50° and 250°C.
The tell-tale light comes on to indicate that the oven is
warming up. When it goes out it means that the required
temperature has been reached. Regular flashing means
that oven temperature is being constantly maintained at
the programmed level.
COOKING HOB SIGNAL LAMP (A)
Signal lamp A on indicates that one or more of the cooking zones are
heating. When all knobs are set to 0, the lamp goes off.