Filter
Top Products
Instructions for the User
11
3. ELECTRONIC PROGRAMMER
LIST OF FUNCTIONS
MINUTE-COUNTER BUTTON
COOKING TIME BUTTON
END-OF-COOKING BUTTON
DECREASE BUTTON
INCREASE BUTTON
3.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display
flashes at regular intervals, showing the symbol . Press the and buttons together, and at the
same time press the or buttons: this will increase or decrease the setting by one minute for each
pressure.
NOTE: Before each programmer setting, switch on the function and set the temperature required.
3.2 Semiautomatic cooking
This function only switches the oven off automatically at the end of the cooking time.
Press the button and the display will light up showing the figures ; keep it pressed, and at the
same time use the value modification buttons or to set the cooking duration. When the button is
released, the count of the programmed cooking duration will start and the display will show the current
time together with the symbols A and .
3.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the button and the display will light up showing the figures ; keep it pressed, and at the
same time use the value modification buttons or to set the cooking duration.
Press the button and the display will show the sum of the current time plus the cooking duration: keep
it pressed, and at the same time use the value modification buttons or to adjust the end of cooking
time.
When the button is released, the programmed count will start and the display will show the current
time together with the symbols A and
NOTE: After making the setting, press the button to view the cooking time remaining; press the button
to view the cooking end time . The logic prevents the setting of incompatible values (e.g. the timer will
not accept a cooking end time with a duration which is too long for this value).