Instructions for the User
28
To edit a humidified fan-mode program by entering the parameters exactly
as required, turn the knob to one of the programs from P1 to P14.
The display shows the parameters contained in the selected program.
Hold down STOP for 2 seconds.
A beeper sounds to indicate that the editing mode has been accessed,
and the message Ut°C appears on the display.
Press START to display the cooking temperature.
Press START or keep it pressed to increase the cooking temperature;
each time START is pressed the temperature increments by 1°C (from 50°
to 300°), or hold START down for increments of 5°C. (N.B. humidification
cycles [U Ht] can only be edited if Ut°C is set at a temperature above
150°C).
Press STOP to move on to displaying the next parameter
The display shows U Ct.
Press START to display the cooking time.
Press START or keep it pressed to increase the cooking time (from 1 min.
to 99 min.).
Press STOP to move on to displaying the next parameter
The display shows U Ht only if Ut°C is set > 150°C
Press START to display the humidification cycles.
Press START or keep it pressed to increase the number of humidification
cycles (from 0 to 6 cycles where 0 means conventional fan-mode cooking
without the aid of humidification).
Press STOP to complete the program editing procedure.