Smeg CA01S Dishwasher User Manual


 
12
CHANGING THE PROGRAM
To change the program in progress the dishwasher must be switched off
by pressing the ON/OFF key (2).
Turn the program selector to the program required and then switch the
dishwasher on again by pressing ON/OFF key (2).
The dishwasher will carry out the new program automatically.
END OF CYCLE
At the end of the washing program the selector will be on one of the
STOP markers, depending on the program carried out.
Switch off the dishwasher by pressing the ON/OFF key (2).
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is advisable to unload the lower basket first, and then the
upper basket.
User instructions