Filter
Top Products
Instructions for Use
36
Before Using
• Before connecting the appliance to the mains
supply, leave it to rest in its place for about 2
hours. In this way you reduce a possibility of
troubles occurring in cooling system due to
transport handling.
• Remove the two plastic spacers which are
situated under the lid and protecting the seal
against damages during transport.
• Clean the interior of the appliance with
lukewarm water into which you have added a
few drops of vinegar or baking soda (1
tablespoon per 1 liter of water).
Instructions for Use
These instructions for use are intended for the
user of the appliance.They describe the appliance
and its correct and safe use. They relate to
various types of freezers therefore you will find
among them also those functions which do not
apply to your appliance.
We Care for the Environment
• Our products use environmentally friendly
packaging, which can be either recycled or
disposed of in an environmentally friendly
manner. To this end, individual packaging
materials are clearly marked.
• These instructions are printed either on
recycled paper or chlorine free bleached paper.
• When your appliance finally wears out, please
try not to burden the environment with it; call
your nearest authorised service agent. (See
Disposing of the Worn Out Appliance)
Energy Saving
• Do not open the lid more frequently than it is
necessary as too frequent openings of the lid
cause temperature rises in the freezer,
excessive formation of frost and consequently
higher energy consumption.
• Take care not to leave the lid open too long,
particularly if the ambient air is hot and humid.
• It is recommendet to remove the frost layer
when it is 3 to 5 mm thick.
• Before loading the appliance with packages of
fresh foods, make sure they are cooled to
ambient temperature (except for the soup).
• If the termostat knob is set towards max (1), do
not forget turn it towards min (1) if intensive
cooling is no more necessary.
• If the gasket is damaged or if it turns out that
the sealing is poor, the energy consumption is
substantially higher. To restore efficiency,
replace the gasket.
• The condenser on the rear wall should be
always clean, free of dust or any impurities.
• Always consider instructions stated in sections
Positioning and Energy Saving Tips, otherwise
the energy consumption is substantially higher.