Filter
Top Products
Instructions for Use
60
Before Putting Into Use
• Before connecting the appliance to the mains supply, leave it for
about 2 hours to stand in place where it will later on be installed. This
will reduce the possibility of malfunctions in the cooling system that
might have occurred due to transport handling.
• Clean the appliance thoroughly, especially the interior (see Cleaning
and Maintenance).
Instructions for Use
These instructions for use were prepared for the user. They describe
the appliance and its correct and safe use. They were prepared for
various types/models of appliances therefore you might find in it some
functions that do not apply to your appliance.
We Care for the Environment
• Our products use environmentally friendly packaging, which can be
either recycled or disposed of in an environmentally friendly manner.
To this end, individual packaging materials are clearly marked.
• These instructions are printed either on recycled paper or chlorine
free bleached paper.
• When your appliance finally wears out, please try not to burden the
environment with it; call your nearest authorised service agent. (See
Disposing of the Worn Out Appliance)
Tips for Energy Saving
• Try not to open the door too often, especially when the weather is
wet and hot. Once you open the door, mind to close it as soon as
possible. This is especially important if you have an upright model.
• Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
• Turn the thermostat knob from higher to lower setting as soon as
possible.
• Never use continuous operation unless unnecessarily required;
switch the operation mode selection switch to the setting for
automatic operation whenever possible.
• Before freezing packages of fresh foods, make sure they are cooled
to ambient temperature.
• Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 3-5 mm thick.