Filter
Top Products
EN
12
4 Using your refrigerator
Setting the operating temperature
The operating temperature is regulated
by the temperature control.
1 = Lowest cooling setting (Warmest
setting)
4 = Highest cooling setting (Coldest
setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
Please choose the setting according to
the desired temperature.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
The normal storage temperature of
your appliance should be -18 °C (0 °F).
Lower temperatures can be obtained
by adjusting the thermostat knob
towards Position 4 (or Max.).
We recommend checking the
temperature with a thermometer to
ensure that the storage compartments
are kept to the desired temperature.
Remember to take the reading
immediately since the thermometer
temperature will rise very rapidly after
you remove it from the freezer.
LED indicators and control
panel
There are three coloured indicator
lights located on the front of the
appliance which shows the operating
mode of the freezer.
Amber Indicator (1)
Illuminates when the fast-freeze
switch (4) is turned on and stays on
for maximum 34 hours or until the fast
freeze button is turned off. Fast-freeze
operation is for freezing fresh food (see
Freezing Fresh Food section).
Green Indicator (2)
Illuminates when the appliance is
connected to the mains and will glow
as long as there is electricity present.
The green indicator does not give any
indication of the temperature inside the
freezer.
Red Indicator (3)
Illuminates
a. When the internal temperature rises
above -5 °C. (The light turns off when
the temperature cools down to - 9 °C)
b. If the appliance is overloaded with
fresh food.
c. If the appliance door is left open
Warm
Cold