Filter
Top Products
16
Confirm the initiation of the program by pressing
.
While the cycle is running the selected program’s led
indicator will flash;
Once the selected program has finished its led indicator
will stop flashing and will remain on. The
led
indicator starts flashing.
Remove the basket
If the door is opened with the wash cycle running the program stops and resets itself. Once the door has been
closed again press the
button to restart the cycle.
Total drainage at the end of the day (models
equipped with drain pump)
After having removed the overflow from the basin, close
the door and press the
button to select the option.
The
led indicator turns on and the LED indicator
flashes.
Press
for 2 seconds to initiate the emptying of the
basin and the boiler with the door closed. The drain led
indicator
starts flashing.
At the end of the function the machine goes into
standby and the drain led indicator stops flashing and
remains on.
To render the machine operational again it is therefore
necessary to insert the overflow and to push the
button.
Total drainage at the end of the day (models not
equipped with drain pump)
Shut off the machine
, open the door, remove the
overflow and wait until the basin has been drained.
Insert the overflow and close the door again.