Smeg DI607 Dishwasher User Manual


 
User instructions
47
After using the table to identify the most appropriate washing program:
x press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
x keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
x close the door; after about 2" the program will start. While it is in
progress, the relative LIGHT will flash (indicating that the program is
being executed).
PROGRAMME
DURATION
CONSUMPTION (3)
NR SYMBOL NAME
TYPE OF
DISHES
AND DIRT
PROGRAM
DESCRIPTION
MINUTES
(2)
WATER
(LITRES)
(1)
POWER
(KWh)
(2)
DETERGENT
GRAMS
1
SOAK
Mixed dishes
awaiting washing
Cold rinse (to
prevent dirt from
drying)
15' 3 0,01 -
2
QUICK
Dishes and
glasses with
light dirt
Wash at 38°C
Cold rinse
Rinse at 58°C
35' 7 0,40 15
3
AUTO 50
Mixed dishes,
normal dirt
Cold prewash and
hot wash (about
50°C) depending
on type of dirt
Cold rinse
Rinse at 68°C
Dry
(**) (**) (**) 21
4
NORMAL
65°C
Mixed dishes
and pans,
normal dirt
Cold prewash
Wash at 60°C
Cold rinse
Rinse at 68°C
Dry
120' 10 0,90 21
5
& INTENSE
Mixed dishes,
normal dirt
which has not
dried
Wash at 65°C
Cold rinse
Rinse at 70°C
35' 7 0,70 21
Only run the soak program with half loads.
The 3/1 option (8) can be selected in all programs except the soak program.
(**) When the "
AUTO 50" or "AUTO 60" program is selected, the dishwasher recognises the
type of dirt and automatically adjusts the washing parameters as appropriate.
(–) Not present.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.
(3) The stated water and power consumption values refer to nominal conditions. Real
values are affected by the type of load of dishes, room temperature and incoming water
temperature.
QUICK
   GI   
MODELS WITH "AUTO" PROGRAM