User instructions
49
BEFORE STARTING THE DISHWASHER AFTER PROLONGED
DISUSE:
x Check that there are no deposits of sludge or rust inside the water
pipe: if there are, allow the water to run from the water supply tap for
a few minutes.
x Plug the power cord back into the socket.
x Reconnect the water intake hose and open the tap again.
TROUBLESHOOTING MINOR PROBLEMS
In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
x the dishwasher is connected to the electrical power supply;
x there is no power failure;
x the water tap is open;
x the dishwasher door is properly closed.
If water remains inside the dishwasher, check that:
x the drain hose is not kinked;
x the drain siphon is not obstructed;
x the dishwasher filters are not clogged.
If the dishes do not come out clean, check that:
x the correct amount of detergent has been added;
x there is regenerating salt inside the special container;
x the dishes are being loaded correctly;
x the selected program is suitable for the dish types and their degree
of soiling;
x all the filters are clean and positioned correctly;
x the spray arm nozzles are not obstructed;
x there is no object obstructing the rotation of the spray arms.