Filter
Top Products
User instructions
28
3. Description of the controls
3.1 Front panel
All the dishwasher controls are grouped on the front panel.
1
WASHING PROGRAM
SELECTOR
2
ON/OFF
BUTTON
3
START/STOP
BUTTON
4
½ LOAD WASH
BUTTON (certain models only)
5
POWER ON
LIGHT
6
SALT
WARNING LIGHT
7
RINSE AID
WARNING LIGHT
8
PROGRAM PHASE
INDICATOR LIGHTS (
ż
light off /
Ɣ
light on)
9
BUTTON FOR
DELAYED START FROM 1 TO 9 HOURS
(certain models only)
10
DELAYED START INDICATOR
DISPLAY
(certain models only)
11
RECESSED DOOR HANDLE
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has been added to the
dispenser
.
•
The baskets have been
correctly loaded.
•
The spray arms are able to
rotate freely
and without obstruction.
•
The dishwasher door is
securely closed
.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to
6 place settings
and allows saving of water and
electricity. It is controlled by the
HALF LOAD
button
(4)
and allows washing in the upper basket
only.
IMPORTANT:
at the end of the program remember
to deactivate the function
to ensure the next
wash is not also carried out in half load mode
by mistake
.
A cutlery basket can be placed in the
upper basket
, while the
lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.