Smeg DWF66SS Dishwasher User Manual


 
POWER SWITCH-ON
To switch on the dishwasher, simply turn the ON/OFF selector (1) until the letter I
appears on the INDICATOR DISC (2).
STARTING THE DISHWASHER
After correctly carrying out all the preceding operations, to start the dishwasher simply
press the START/STOP (5) button for a few seconds, until the start cycle acoustic
device sounds. The INFORMATION DISPLAY (4) will show the duration of the program
in minutes. The duration time is only approximate, because it depends on the washing
conditions (quantity of dishes, water temperature, etc.), and is also continually updated
as the washing program progresses.
The INFORMATION DISPLAY (4) shows the estimated duration of the washing
program; if it exceeds 60 minutes, the hours and minutes are displayed in alternation.
If it is necessary to open dishwasher door during the washing cycle, there
will be a 1-minute delay before the program can be resumed. After correctly
closing the door, press the START/STOP (5) button again.
This operation may negatively affective the progress of the washing cycle.
END OF CYCLE
The end of the washing cycle is signalled by a brief sounding of an acoustic device and
by the blinking of the selected program on the INFORMATION DISPLAY (4).
Before setting a new washing program, the door must first be opened, then reclosed, or
the START/STOP (5) button pressed to “reset” the display and stop the flashing.
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program
(*) Selector on P6
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting Depending on the model 3/4 or 4/6
EN 50242 STANDARD LOADS
LOWER BASKET UPPER BASKET WITH
METAL CUP RACK
UPPER BASKET WITH
PLASTIC CUP RACK
Depending on models, the cutlery basket may have removable grilles in which the
cutlery can be inserted to keep the items far enough apart and allow optimal water
passage.