Filter
Top Products
Prior to startup
Before you start operating your appliance, the
following points should be re-checked for
safety:
• Is the appliance, standing level on the floor?
• Is there sufficient space for good air
circulation?
• Is the interior clean? (Also see the section
“Cleaning and care”)
• Set the thermostat knob half way between
1 and 5 or Min. and Max.
• Now connect the appliance to the mains.
• The compressor is turned on; the interior
light comes on when the door is opened.
Do not place foodstuff into the refrigerator until
the temperature has reached the desired level.
en en
1 = Lowest cooling setting (Warmest setting)
5 = Highest cooling setting (Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the fridge
should be around +5°C.
Please choose the setting according to the
desired temperature.
You can stop operation of your appliance by
turning the thermostat knob to “0” position.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately above the
vegetable compartment.
The interior temperature also depends on
ambient temperature, the frequency with which
the door is opened and the amount of food
kept inside.
Frequently opening the door causes the interior
temperature to rise.
For this reason, it is recommended to close
the door again as soon as possible after use.
Setting the operating
temperature
(Fig. 4)
The operating temperature is regulated by the
temperature control.
4
Warm Cold
1 2 3 4 5
(Or) Min. Max.