Filter
Top Products
Instructions for the installer
7
For operation on 380-415V3N
∼
: use an H05RR-F / H05RN-F /
H05V2V2-F type five-core cable (5 x 2.5 mm
2
).
For operation on 380-415V2N
∼
: use an H05RR-F / H05RN-F /
H05V2V2-F type five-core cable (cavo di 4 x 2.5 mm
2
).
For operation on 220-240V
∼
: use an H05RR-F / H05RN-F /
H05V2V2-F (cavo di 3 x 4 mm
2
).
The cable end to be connected to the appliance must be
provided with an ground wire (yellow-green) at least 20 mm
longer.
Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in
case of operation from a 220-240V∼ power supply, with a three-core plug. Make sure that plug and
wall socket are of the same type and are in conformity with regulations in force. Make sure that the
appliance is properly earthed. Before powering, check that the power line is properly earthed. Avoid
using adapters or shunters.
The manufacturer declines all responsibility for damage to persons or things caused by non
-
observance of the above prescriptions or by interference with any part of the appliance.
2.2 Wall fixing
• Stretch out the chain attached to the cooker
horizontally so that the other end touches the
wall.
• Mark the wall in the position where the hole is to
be drilled.
• Drill the hole, insert the finned dowels and attach
the chain.
• Move the cooker up against the wall.