Smeg KSEG7X Ventilation Hood User Manual


 
EN
1
12
INSTALLATION
SNAP-ON FITTING
• The hood can be installed either directly on the bottom surface
of the wall units using snap-on side supports.
Cut a fitted opening in the bottom surface of the wall unit, as
shown.
Insert the hood until the side supports snap into place.
Lock in position by tightening the screws Vf from underneath
the hood.
13
259
497 - 677
Vf
SNAP-ON FITTING
• The hood can be installed either directly on the bottom surface
of the wall units (min. 650 mm above the hob) using snap-on
side supports.
Cut a fitted opening in the bottom surface of the wall unit, as
shown.
Fix using the 8 screws 12a provided.
13
259
497 - 677
12a