Smeg LSA6051B Dishwasher User Manual


 
User instructions
14
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program
(*) Selector on
3
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting Depending on the model 3/4 or 4/6
1.2 Washing programs
Before starting a washing program make sure that:
The water supply tap is open.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
To cancel the program in progress the dishwasher must be switched off
by pressing the
ON/OFF
key
(2)
(see section "3. Description of the
controls").
Turn the program selector to
SOAK
and wait for the dishwasher to start.
On completion of the program, switch off the dishwasher by pressing the
ON/OFF
key
(2)
.
CHANGING THE PROGRAM
To change the program in progress the dishwasher must be switched off
by pressing the
ON/OFF
key
(2)
(see section "3. Description of the
controls").
Turn the program selector to the program required and then switch the
dishwasher on again by pressing
ON/OFF
key
(2)
. The dishwasher will
carry out the new program automatically.