Filter
Top Products
User instructions
"3/1" OPTION BUTTON (on some models only)
(available in all programs except the soak program)
By pressing the button
(4)
you activate the "
3/1
" option, confirmed when
the relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple
action” products; in this case the dishwasher will use the product in an
optimal way avoiding salt and rinse-aid consumption, which could
already be found in the dishwasher.
Note:
When selecting the "
3/1
" button, it is normal that the salt and
rinse-aid lights remain on, if their containers are empty.
DELAY PROGRAM (on some models only)
The
PROGRAM DELAY
button
(3)
can be pressed to delay the start of
the washing program by
3
,
6 or 9 hours.
This function allows you to set
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the "program delay"
set previously will come into effect (the light corresponding to
3, 6
or
9
hours
flashes).
To
reset or change the delay
once the program has started:
• press the
START/PAUSE
button
(5)
for a few seconds, until the
PHASES/PROGRAM
lights
(10)
come on;
• press the
DELAY PROGRAM
button
(3)
several times “until the
program delay” returns to zero (all the lights indicating the delay go
out);
• press the
START/PAUSE
button
(5)
to start the new program.