Filter
Top Products
12
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the START/PAUSE button (4) for a
few seconds, until the PROGRAM STARTED light (5) stops flashing.
Now press the START/PAUSE button (4) again until "P0" appears on the
display (about 10 seconds).
CHANGING THE PROGRAM
To modify the program keep the START/PAUSE button (4) pressed for a
few seconds, until the PROGRAM STARTED indicator light (5) stops
flashing, then select the new program following the instructions provided
above; press the START/PAUSE button (4) again and keep it pressed
for a few seconds, until the indicator light (5) starts to flash again.
User instructions
SELECTING HALF LOAD WASH
(on some models only)
This function is ideal for small loads and saves water and electricity. It is
controlled by the
HALF LOAD (10)
button, with two alternatives:
1) press the button
once
to select washing in the
top basket
(the
relative light comes on);
2) press the button
a second time
to select washing in the
bottom
basket
(the relative light comes on);
3) press the button
a third time
to return to the normal
full load
washing mode (washing in both baskets, both lights off).