Filter
Top Products
Instructions for the user
24
7. USE OF THE COOKING HOB
7.1 Hobs with knobs
7.1.1 Single plates
Each knob shows the plate it is for.
To heat, turn the knob to the desired position (1 to 6). Adjustment is continuous
so that the appliance also operates at any intermediate value.
7.1.2 Dual plates
Each knob shows the plate it is for.
To heat the inner cooking zone, turn the knob to the desired position (1 to 6).
To heat both the inner and outer cooking zones, turn the knob to
and then
release. The knob will thus return to 9. To adjust heating intensity, rotate the
knob anticlockwise to the desired position. To return to heating of the inner
cooking zone only, set the knob back to 0 and then turn to the desired position
(1 to 6).
7.1.3 Description of symbols
REAR LEFT
REAR RIGHT
FRONT LEFT
FRONT RIGHT
7.1.4 Residual heat
The 4 signal lamps located between the cooking zones come on when the temperature
of one or more of the heating zones exceeds 60°C.
The lamps go off upon temperature dropping to below approximately 60°C.
7.1.5 Switching off
To turn off, return the knob to 0.