Smeg PLTW640X Dishwasher User Manual


 
User instructions

3.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"3. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
The water supply tap is open.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
SWITCHING ON
When the
ON/OFF
button
(1)
is pressed, the dishwasher switches on.
The indicator lights will display the dishwasher's "status".
PROGRAMMING
Programming operations are only possible with the
door closed
.
As long as the door is open, the
PROGRAMS (4)
lights remain off.
PROGRAM SELECTION
Press the
PROGRAM SELECTION
button
(3)
several times until the light of
the program required comes on.
Bio
end
56 7 4
1
3
2