Filter
Top Products
Instructions for the Installer
9
3.1 Mounting
Before mounting the device to the unit, lay the provided adhesive sponge
onto the glass surface to separate it from the unit.
After fixing the provided adhesive sponge (B) to the glass, mount the
device to the unit using the mounting brackets (A) provided, as shown in
the figure.
When fixing the cooktop to the cabinet, use only the holes provided, as illustrated here.
NOTE: This appliance must not be built-in above a dishwasher.
Installation of an oven without a cooling fan underneath the cooktop is forbidden.
Pass the power supply cable through the back of the unit, making sure that it does not touch the bottom
casing of the cooktop or the oven (if any) installed below it.