Filter
Top Products
User instructions
14
3.3 Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY (8)
from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
• The water supply tap is
open.
• The
correct amount of detergent
has been added to the
dispenser
.
• The baskets have been
correctly loaded.
• The spray arms are able to
rotate freely
and without
obstruction.
• The dishwasher door is
securely closed
.
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the START/PAUSE button (3) for a
few seconds, until the beep of confirmation is heard.
At this point, to end the program, press the HALF LOAD (5) and
START/PAUSE (3) buttons simultaneously.
"P0" appears on the INFORMATION DISPLAY (8) and the dishwasher
will automatically switch to the end of the cycle, displaying the word
"End" when done.
123456
78910 11
12