Filter
Top Products
Instructions for the user
8
8. FRONT CONTROL PANEL
All the cooker controls and commands are on the front panel.
OVEN THERMOSTAT KNOB FRONT LEFT-HAND COOKING ZONE
OVEN FUNCTION KNOB REAR LEFT-HAND COOKING ZONE
CENTRAL COOKING ZONE
REAR RIGHT-HAND COOKING ZONE
FRONT RIGHT-HAND COOKING ZONE
Before using the oven make sure that the symbol ; appears on the display. See paragraph “10.
ELECTRONIC PROGRAMMER”.
COOKING HOB CONTROL KNOB
Standard heating
The circle next to each knob indicates the cooking zone it controls. To heat, turn
the knob to the desired position. Adjustment is continuous so that the appliance
also operates at any intermediate value. To turn off, return the knob to 0
Double heating
The circle next to each knob indicates the cooking zone it
controls. To heat the inner cooking zone, turn the knob to the
desired position.
To heat both the inner and outer cooking zones, turn the
knob to / ; and then release. The knob will thus
return to 9. To adjust heating intensity, rotate the knob
anticlockwise to the desired position 0. To return to heating of
the inner cooking zone only, set the knob back to and then
turn to the desired position. To switch off, return knob to 0.
OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning the knob clockwise to
the required temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning light will come on when the
oven is heating up. When it goes out it means that the required temperature has
been reached. Regular flashing means that oven temperature is being
constantly maintained at the programmed level.