Filter
Top Products
Instructions for the user
7.5 Removing the door glazing
The glass in the door should always be kept thoroughly clean. For easier
cleaning, the door glazing can be fully removed by proceeding as
described below. After blocking the door in position as described in point
"
7.4 Removing the door", remove the inner glass using leverage as shown
in figure 1, and release the 4 pins which fix the glass to the door. If your
oven also has the middle glass (figure 2) this can simply be lifted out. After
cleaning, first fit the middle glass (if featured on your oven) and then
replace the inner glass, using the oven door supports as a fulcrum as
shown in figure 3 (see detail A in figure 3). Once the glass has been fitted
on the door, apply a little pressure against the 4 fixing pins. If the door
should close during these operations, simply relock one of the hinges as
described in point "
7.4 Removing the door". The panes of glass can now
be washed separately.
1)
2)
3)
51