Filter
Top Products
71
Instructions for the user
10.4 Removing the internal glass panels
The glass in the door should always be kept thoroughly clean. To facilitate
cleaning, it is possible to remove the door (see 10.2 Removing the door)
and place it on a canvas; or open it and block the hinges in order to extract
the glass panes.
The glass panes of the door can be completely removed by following the
instructions provided below.
Warning: before removing the panes of glass, make sure that at least one
of the door's hinges has been locked in open position as described in
paragraph “10.2 Removing the door”. This operation might have to be
repeated during the glass removal process if the door is accidentally freed.
10.4.1 Removing door glazing on multifunction models:
Removing the internal glass:
• Remove the internal glass
pane, holding it in the positions
indicated in figure (X).
• Pull it towards you, following the
movement indicated by the
arrows.
Removing the middle glass:
• Remove the middle glass pane,
holding it in the positions
indicated in figure (X).
• Pull it towards you, following the
movement indicated by the
arrows.
Cleaning:
• Now it is possible to clean the
external glass and the
previously removed panes,
using absorbent kitchen roll or,
in the case of persistent dirt,
washing with a damp sponge
and neutral detergent.