Smeg SDCY66-1 Dishwasher User Manual


 
Installation instructions

WHEN CLEANING AND MAINTAINING THE APPLIANCE:
BEFORE CARRYING OUT ANY WORK, ALWAYS UNPLUG THE APPLIANCE
FROM THE ELECTRICAL SUPPLY OR SWITCH OFF THE ALL-POLE
DISCONNECTION DEVICE.
FOR GREAT BRITAIN ONLY:
THIS APPLIANCE MUST BE EARTHED.
Fuse replacement
If the mains lead of this appliance is fitted
with a
BS 1363A 13amp
fused plug, to
change a fuse in this type of plug use an
A.S.T.A.
approved fuse to
BS 1362
type
and proceed as follows:
1.
Remove the fuse cover
A
and fuse
B
.
2.
Fit replacement 13A fuse into fuse
cover.
3.
Refit both into plug.
The fuse cover must be refitted when changing a fuse and if the fuse
cover is lost the plug must not be used until a correct replacement is
fitted.
Correct replacement are identified by the colour insert or the colour
embossed in words on the base of the plug.
Replacement fuse covers are available from your local electrical store.