Filter
Top Products
15
GB
RECOMMENDED CLEANING PRODUCTS
Product Can be used for cleaning...
... the glass? ... the frame?
Gentle liquid detergents YES YES
Powder or aggressive detergents NO NO
Special vitroceramic
YES YES
cleaners
Grease removal sprays (ovens, etc.) NO NO
Soft cleaning cloths YES YES
Kitchen roll YES YES
Dish cloths YES YES
Nickel cleaning pads (never dry) YES NO
Steel cleaning pads NO NO
Hard (green) synthetic cleaning pads NO NO
Soft (blue) synthetic cleaning pads YES YES
Scrapers for glass YES NO
Liquid polish for domestic equipment
YES YES
and / or glass
Please note:
• Handle cleaning scrapers with care as they
have sharp edges that can cause cuts!
• Only use the edge of the scraper to clean
the glass. Avoid touching the glass with the
body of the scraper as this could scratch the
surface.
• Use blades which are in perfect condition
and immediately replace them at the first sign
of wear.
• After using the scraper retract the blade and
lock it in the retracted position (see figure 8).
Changes in the colour of the glass
Colour changes do not affect the operation or
reliability of the hob. They are normally caused
by inadequate cleaning or defective recipients.
Metallic reflections are caused by metallic
recipients sliding across the glass surface.
They can be removed by thorough cleaning
using a special product for cleaning vitrocera-
mic hobs although it may be necessary to
repeat the cleaning process several times.
Fig. 8
Scraper in "safe"
position
Scraper with blade
exposed